Have a Holly Jolly Holiday!

Hello Everyone,

It is my second post today as I was longing to play along the MFT Sketch Challenge #414. It has been a while and I missed using my MFT goodies.

I came up with a design I could multiply – I actually made 4 cards at once, 2 in English and 2 in Hungarian (not on the pics).

MFT_Santa&Friends_zsm01

I started with a stitched rectangle cut from light blue cardstock. I used the Snowfall Background stamp to heat emboss on it with WOW White Puff embossing powder.

MFT_Santa&Friends_zsm05

Then I stamped, coloured and die cut the images. I used Copics and kept it very simple. After die cutting I used an embossing ink pen to cover some parts of the suit and hat with embossing ink and used the same white puff embossing powder to add more texture. I love how it turned out!

MFT_Santa&Friends_zsm03

I also added a piece of blue gingham pattered paper to the bottom, and heat embossed the sentiments on a thin strip of dark grey cardstock with white embossing powder.

MFT_Santa&Friends_zsm04

I assembled the card using liquid glue and mounted it on a white top folding card base.

MFT_Santa&Friends_zsm02

I am so happy with this cheerful design, I hope I can make even more multiples of it before Christmas! I will link this up to the MFT Sketch Challenge.

Hope you like my card and will return tomorrow for some more cuties!

See you,

Zsofi

 

MFT World Card Making Day Challenge

Hello Everyone,

This is my second post today as I managed t find some extra crafting time this afternoon. I really wanted to participate in the MFT World Cardmaking Day Challenge, where they gave us 3 tasks. I made the following 3 cards.

CARD 1 – ROYGBIV 

I created a stencilled sky background using Tumbled Glass Distress Oxide and the Cloud stencil from MFT. I die cut the rainbow die from pastel coloured cardstocks and adhered them to the background. I also die cut a stitched cloud from the same die set from satin pearl cardstock. Then the Hello die from silver glitter cardstock.

MFT_WCMD_zsm1IG

I stamped and coloured the cute unicorn from the BB Magical Unicorns set. I used Copics, a white gel pen and a black glaze pen to add some details.

MFT_WCMD_zsm01a

I also covered the hair with Tonic Aqua Shimmer pen for a subtle sparkle. After die cutting it, I popped it up on the cloud an adhered them to the card base using 3D foam squares.

MFT_WCMD_zsm01b

CARD 2 – Clean and Simple

I had a pretty pink and pearl alcohol ink background from a playing session which I wanted to use. I cut a 4.25×4.25 square from it and ran the Happy Birthday Block die over it.

MFT_WCMD_zsm02IG

I die cut the same die using white satin pearl cardstock and paper pieced them together on a black shimmer rectangle which I have adhered to a white note card.

MFT_WCMD_zsm02c

To finish it of I added a thin black strip with a white embossed sentiment on it (Essential sentiments stamp set).

MFT_WCMD_zsm02b

CARD 3 – Flower Power

I had another pretty alcohol ink background waiting to be used. I cut a rectangle from it and matted it with black cardstock before adhering it at an angle to a white card base. I used the Sketch Challenge #405 as a guide.

MFT_WCMD_zsm03IG

I die cut a flower (Stitched Bloom die set) from white, black and alcohol inked cardstock scraps. I layered them on top of each other slightly offset.

MFT_WCMD_zsm03c

I also die cut 2 stitched leaves from white cardstock and white heat embossed a sentiment on a thin strip of black cardstock.

MFT_WCMD_zsm03d

As a finishing touch I added some white-black enamel dots in the middle of the flower.

MFT_WCMD_zsm03b

I will link these up to the respective challenges, and the last on also to the Sketch Challenge #405

I hope you liked my cards and will pop in again soon.

See you,

Zsofi

2018 Card Design Superstar: Colouring Virtuoso

Hello Again,

As promised here is my second card for the MFT Card Design Superstar contest, for the Colouring Virtuoso category. I love to colour and the medium I enjoy the most is Copics. So I made a cute little Halloween card:

MFTCardDesignSuperstar_CV_zsm01

I started with stamping and colouring the images from the Witch way to the candy stamp set (the older version). I used new-to-me colours to stretch my supplies, I really enjoyed coming up with new colour combos. I used the coordinating dies to cut the images out. (As these are the old dies, the white rim is a bit wider than on the newer designs. I am thinking of re-ordering this stamp/die set, since I use it often and would love to have open dies)

MFTCardDesignSuperstar_CV_zsm02

For the background I bounced some blue-purple-black alcohol inks on Yupo paper with the help of a round felt blending tool and blending solution. I kept going till I achieved that marbled look. I think it is a pretty night sky like this.

MFTCardDesignSuperstar_CV_zsm04

To set the scene I die cut the Farm fence from grey cardstock an some grassy borders from black shimmer cardstock. I assembled the card placing the witch in the front using 3D foam tapes, while all the rest was adhered flat.

MFTCardDesignSuperstar_CV_zsm05

The sentiment is white heat embossed on a thin strip of black cardstock and added to the top of my card. To finish the design, I used a white gel pen and a black glaze pen to add some details and also some glossy accents on the boots, hat and the bow of the cat. I could not resist adding funny eerie eyes to the cat, it looks so funny this way!

MFTCardDesignSuperstar_CV_zsm03

If I had more time, I would try to create something for the Innovation Master category too, but I think I just need to let it go this year.

Thanks for checking my entries for the MFT Card Design Superstar Contest. Now just wish me luck to be selected 😉

See you soon with more fun cards!

Zsofi

2018 Card Design Superstar: Clean & Simple Genius

Hello Everyone,

I am struggling with a nasty flu but I could not give up on the yearly MFT Card Design Superstar contest, so I created this simple Fall card.

MFTCardDesignSuperstar_CAS_zsm01

I started with creating an alcohol inked background on Yupo paper using Fall colours. I mixed some greens, yellows, a drop of brown and copper too. When it was all dry, I treated it with an antistatic powder tool and black heat embossed one of the leaves from the Geometric Greenery  stamp set 3 times. I used the coordinating die to cut them out.

MFTCardDesignSuperstar_CAS_zsm02

I die cut a double stitched rectangle from some specialty cardstock, matted it with a black rectangle and adhered it to a white card base.

MFTCardDesignSuperstar_CAS_zsm04

The sentiment is a stacked Grateful die cut, the upper layer I cut from shiny black cardstock to match the heat embossing.

MFTCardDesignSuperstar_CAS_zsm03

I popped up the 3 leaves using 3D foam tape, and my card is finished.

MFTCardDesignSuperstar_CAS_zsm05

I will upload this card to the above mentioned contest – in the last minute I think 😀 Next year hopefully I will plan ahead better.

See you soon with my second entry for the contest.

ZSofi

 

MFT Summer School – ocean cards

undertheseaFB_02

Hello Everyone,

Welcome to the 4th post in my Under the sea Card Series, which is a long one. I am participating in the MFT Summer School and created all my homework with an ocean theme using several MFT stamps.

Here is a look at all in one (except for the first homework as I blogged about it before).

MFT_Summer_school_allIG

Focal Point

MFT_Summer_school_01

For this card I heat embossed the whimsical waves background stamp with white embossing powder on Bristol Smooth cardstock and blended some Distress inks on it. I spritzed it with water for a distressed look and dabbed it off with a paper towel.

MFT_Summer_school_01a

Then I die cut a rounded stitched rectangle from it and also a skinny frame using a large rectangle die. I adhered both on  a top folding white card base and white heat embossed a sentiment on a black cardstock strip.

MFT_Summer_school_01b

I stamped and coloured with Copics one of the mermaids from the Mermazing stamp set and cut it out with the coordinating die. I added glossy accents to the star in her hair and stardust stickles to her mermaid tail. I mounted her on the background with 3D foam squares and added some iridescent bubbles from Studio Katia as embellishment.

MFT_Summer_school_01c

Visual triangle

MFT_Summer_school_02

I have prepared this card with the MFT Sketch Challenge #399 in mind.

I masked a wide strip on a white card base with masking tape and sponged some Tumbled glass distress ink on it. On a piece of Ranger Watercolour cardstock I sponged Blueprint sketch distress ink and went back with the same colour using the Waves stencil. I love the tone-on-tone look I get this way. I die cut a double stitched circle out of this to be my focal panel.

MFT_Summer_school_02a

I stamped and coloured some fish from the Gill friend stamp set and used the coordinating dies to cut them out. I popped them up on the circle background using 3D foam squares. I added a white heat embossed sentiment on a black strip and used 3D foam tape to adhere it all to the card base.

MFT_Summer_school_02b

A bit of glossy accents on the stripes of the fish and some iridescent bubbles finished off this card.

Ombre

MFT_Summer_school_04

This is my favourite of all, as it is clean and simple (which I always struggle with) yet so impactful.

MFT_Summer_school_04d

I die cut some waves from the Ride the waves (retired) die set from different shades of aqua cardstocks. I adhered them to a white card base leaving a bit of white space in between. I curved a sentiment from the Beach Buds stamp set to fit the upper wave and stamped it in black.

MFT_Summer_school_04b

I stamped and coloured the shark from the same stamp set and used the coordinating die to cut it out. I also die cut a balloon from the Balloon alphabet die set from some specialty cardstock I had in my stash. As it is a very thin paper I backed it with a white die cut balloon. I wanted it to be sturdy enough to tie a thin thread around it. The other part of the thread I tied to the fin of the shark and mounted the image on the card with 3D foam squares.

MFT_Summer_school_04a

I scattered a few Ocean waves crystals from Studio Katia all over the waves and it was all done.

Rainbow

MFT_Summer_school_03

I had an idea of some rainbow fish and the Adorned Ocean friends set was perfect for what I had in mind. I white heat embossed the fish images on Ranger Watercolour cardstock and die cut them with their coordinating dies.

MFT_Summer_school_03cIG

I also heat embossed the Balloon strings background stamp on heavy weight vellum using WOW Seaglass embossing powder and backed it with a light blue cardstock.

MFT_Summer_school_03a

I also die cut 2 white strips using the Sticthed Basic edges 2 die set and adhered it to the vellum from both sides. I stamped the sentiment in black and popped up the 3 fish with 3D foam squares.

MFT_Summer_school_03b

I will upload these projects to the MFT Summer School challenges and to this week’s Sketch Challenge #399 too.

I hope you liked this ocean themed post and my cards made you smile. Till next time, have a wonderful day!

Zsofi

Oh Crab! – Under the sea Card Series #2

undertheseaFB_02

Hello Everyone,

I am back with the second card in my Under the Sea Card Series: a belated funny birthday wish. The layout of this card was inspired by the current Sketch Challenge #398 at MFT. Also it is part of my submissions for the MFT Summer School 2018.

UTScardseries_MFT01_01IG

I stamped, coloured and die cut the bigger crab from the MFT Just Beclaws set. I used Copic markers to add colour to these adorable images.

UTScardseries_MFT01_02

Then I used the MFT Blueprint 22 die set to cut circles from textured white cardstock and the background panel from patterned paper (MFT Tiny check) along with the wavy border which I cut from red cardstock.

UTScardseries_MFT01_03

On the bottom of this I white heat embossed the sentiment and assembled the card on a white card base. I popped up the crabs with 3D foam squares and added funny eerie eyes to both of them (Simon Says Stamp). And my card is finished. I love how a cute image and the Blueprints dies make it easy to whip up a quick but pretty card.

UTScardseries_MFT01_04

I will upload this also to the MFT Summer School Monochromatic Challenge and the MFT Birthday Project Clean and simple too.

I hope you enjoyed my card for today and wish to see you soon for the next one in  the series.

Have a happy day,

Zsofi

 

Hello Sunshine

Hello Everyone,

I wanted to share with you a really summery card inspired by the Seven Hills Crafts monthly challenge.

Image may contain: ocean, water, text and outdoor

SHC_junechallenge_01

I wanted to use my new goodies I received from SHC a week or so ago. I stamped and coloured with Zig Clean Colour Real Brush markers the MFT Beach babe image. I used the coordinating dies to cut her out.

SHC_junechallenge_02

Added some sparkle (Tonic Aqua shimmer pen) and shine (Glossy Accents), and used a black glaze pen on her eyes.

SHC_junechallenge_03

Then I worked on the background on a stitched rectangle cut from Bristol Smooth paper. The inspirational photo really made me try to make a pink sandy beach. I used Distress Oxide inks and masking tape. For the water I tore the masking tape for an uneven edge and made sure that there is a tiny white gap between the sandy beach and the sea to look more realistic. I used the MFT Waves stencil to add the waves.

SHC_junechallenge_06

For the sentiment I stamped Hello in black and adhered under it a die cut Sunshine. I cut it twice, once from white and once from pink glitter paper and layered them a bit offset for a shadow effect.

SHC_junechallenge_04

I popped up the girl with 3D foam squares and hand drew some birds in the background. And my card is finished. I really love the pink-teal look.

SHC_junechallenge_05

I will upload this card to the Simon Says Stamp Wednesday Challenge Bright and Cheerful too.

Thanks for stopping by today and hope to see you soon again.

Have a lovely weekend,

Zsofi

 

You are my favourite

Hello Everyone,

I did not have time to share with you the card I made for my sweet husband for Father’s Day – it can actually serve as an everyday card too. I used the MFT Sketch Challenge #389 as inspiration for the layout.

MFTsketch389_01

I started with die cutting a white stitched rectangle and die cut the You are my favourite die on the right side. Then I popped up the panel on an aqua striped patterned paper using 3D foam tape.

MFTsketch389_05

I stamped some of the bears from the Bitty Bears stamp set, coloured them with Copics and cut them with the coordinating dies. I mounted them on the background using 3D foam squares. I added some extra shimmer and shine to the balloon and present the bears are holding with a Tonic Aqua Shimmer pen and glossy accents.

MFTsketch389_03

I also used a black glaze pen on the eyes and noses, the latter got a bit of glossy accent to for more dimension.

MFTsketch389_02

The sentiment is from the All About Mom stamp set, white heat embossed on a thin strip of chocolate cardstock.

MFTsketch389_04

I will link this up to the MFT Sketch Challenge #389. I hope you like my card and will return soon for more inspiration.

See you,

Zsofi

 

Father’s Day Cards

Hello Everyone,

In Hungary we do not have officially Father’s Day which is so unjust in my opinion. So I plan to celebrate with my kids and the heroes of our family on Saturday. I made already 2 cards which my kids can give them: one for grandpa and one for daddy. The layout was inspired by the current MFT Sketch Challenge #388.

MFT_fathersday_05

MFT_fathersday_02

I stamped the images from the Giraffing me crazy set, coloured them with Copics and cut them out with the coordinating dies.

MFT_fathersday_07

I cut 2 simple white tags and glued the giraffes on them. On one card I placed them in a way that they look like hugging each other. So cute!

MFT_fathersday_03

I heat embossed the chosen sentiments (one from the stamp set, the other from the More Essential sentiments set) in white on dark cardstock scraps and cut some banners. I adjusted the length with the partial die-cutting technique.

MFT_fathersday_04

MFT_fathersday_06

I chose patterned papers as backgrounds and popped up the tags with 3D foam tape. I embellished the cards with a little enamel heart on each. I could not resist adding google eyes to the giraffes and used glossy accent on their dots for a special look.

MFT_fathersday_08

MFT_fathersday_01

I hope you like it and will return soon for more inspiration.

See you,

Zsofi

 

 

 

Hello, gullfriend

Hello Everyone,

I am popping in today with a last minute card for the current MFT Sketch Challenge #387.

MFTsketch387_01

I started with stamping an colouring the funny seagulls from the MFT Seaside seagulls set using Copic markers. I used the coordinating dies to cut them out, adorned them with funny google eyes and added glossy accent to their beaks.

MFTsketch387_02

For the background I masked off 3 stripes on Bristol Smooth paper using painter’s tape. I applied Distress inks (Blueprint Sketch, Mermaid Lagoon and Broken China). Then I taped down the MFT Abstract stencil and went back with the same inks. Before removing the stencil I sprayed it with Tsukineko Shimmer Spritz for a subtle sparkle.

MFTsketch387_03

When my panel was all dry I heat embossed in white 3 of the sentiments form the same stamp set.

MFTsketch387_05

Finally I used 3D foam squares to mount the seagulls and added some clouds too with liquid glue.

MFTsketch387_04

I will also link this up to the Simon Says Stamp Monday Challenge All things bright and beautiful and Wednesday Challenge Anything goes.

I hope you like this card and will join me next time too for more fun projects.

See you,

Zsofi